Sound deadened CJ engine bay, mainly under bonnet, so with slight variation would suit other mod
Under bonnet as I didn't want to affect airflow over the top of the engine due to warranty considerations,
decided to stick with the existing crappy 1mm!!?? ( be careful when removing very fragile New $104)
sound deadening item and fill in the spaces between it and the outer skin of the bonnet. All products I
used are from Clark Rubber (next picture shows items). Glued with spray on glue (Clark Rubber and Autobahn)
Formshield 12mm foam side to outer bonnet skin (not shown) cut smaller to fit outer skin only,
otherwise too thick to fit between outer skin and original item. next cut and fit Grey foam 12mm in spaces
shown glued to metallic side of Formshield. Make sure to use glue on both surfaces at all time
replace original item.
Done
Materials used
Next stop noise going through windscreen place self adhesive strips as shown in photo below
Strips used 25x20mm on side of mudguard and under bonnet.
18x20mm shown in front of windscreen was later placed under bonnet.
Warranty problem?
Under bonnet as I didn't want to affect airflow over the top of the engine due to warranty considerations,
decided to stick with the existing crappy 1mm!!?? ( be careful when removing very fragile New $104)
sound deadening item and fill in the spaces between it and the outer skin of the bonnet. All products I
used are from Clark Rubber (next picture shows items). Glued with spray on glue (Clark Rubber and Autobahn)
Formshield 12mm foam side to outer bonnet skin (not shown) cut smaller to fit outer skin only,
otherwise too thick to fit between outer skin and original item. next cut and fit Grey foam 12mm in spaces
shown glued to metallic side of Formshield. Make sure to use glue on both surfaces at all time
replace original item.
Done
Materials used
Next stop noise going through windscreen place self adhesive strips as shown in photo below
Strips used 25x20mm on side of mudguard and under bonnet.
18x20mm shown in front of windscreen was later placed under bonnet.
Warranty problem?