ozz
New Member
1) open door, all the way
2) Theres a screw in the plastic near the inside hinge of the door, bought halfway up. take it out.
3) take out screw inside the hand pocket on the door. (the thing you grab to close the door)
4) Pull the handle like your opening the door and hold the handle "open". theres a screw behind it, can be a little difficult to get out.
5)Remove the window winder by popping off the little clip between the handle & the door trim
You also have to wiggle the plastic surrounding the door handle out the door. "open" the door handle again, it will slide up and out through it.
Then, just grab the door trim, and pull(feel underneath towards the rear of the door & you will feel a 2cmish hole to grab onto). Its held in by clips. Dont be afraid to give it a solid tug.
2) Theres a screw in the plastic near the inside hinge of the door, bought halfway up. take it out.
3) take out screw inside the hand pocket on the door. (the thing you grab to close the door)
4) Pull the handle like your opening the door and hold the handle "open". theres a screw behind it, can be a little difficult to get out.
5)Remove the window winder by popping off the little clip between the handle & the door trim
You also have to wiggle the plastic surrounding the door handle out the door. "open" the door handle again, it will slide up and out through it.
Then, just grab the door trim, and pull(feel underneath towards the rear of the door & you will feel a 2cmish hole to grab onto). Its held in by clips. Dont be afraid to give it a solid tug.