Adjusting CH Head lights

should be some screw type things at the back, should be rather straight forward once u start fiddling
find a nice flat straight road at night and adjust till it looks how u want it to
 
Or park it level about 8m from a wall, then cover one of the headlights and adjust the other, then swap.
 
Shouldn't cover one, you need to see both lines so they match up and you get an even spread of light.
 
Sorry, I meant cover one and do it to get your heights right, then uncover and then adjust so they are level.
 
were you able to adjust the headlights?? I am having the same problem...

I bought a set of lights from America (black ones) for only $160.....only thing is they are configured for yank driving so the right side shines high and long and the left is short and low.......needs to be the other way around...

there are 2 "screw" sections at the back....do i have to work on both of these? also...i cant seem to access the 2nd screw so I guess I have to remove the front bar right and unscrew the lights???
 
I managed to adjust mine without removal of the front bar. Took a bit of mucking around though.
 
how did you get down to the "turning screws" in the bottom corner?? don't have another free weekend for a while now so looks like im going to have to wait maybe until I can get the front bar off.
 
treas92 said:
I managed to adjust mine without removal of the front bar. Took a bit of mucking around though.
Click to expand...

how did you get to the back screws?? like in the bottom corner behind the battery?? there is a piece of body in the way...
 
If anyones done this, pictures of screw locations would be awesome. I need to adjust mine as well. :)
 
You must log in or register to reply here.
Back
Top