4g15 sandwhich plate
- Thread starter Icybienz
- Start date
Hey mate, just a generic one will suit. You’ll want one with a range of adapters. I got a moshimoto one, and needed a 1” deep socket to install the adapter.
Z411 is the standard filter, I think a z436 will also suit. You can check at a local supercheap or something, just open a bunch of filters and see which ones thread on
Z411 is the standard filter, I think a z436 will also suit. You can check at a local supercheap or something, just open a bunch of filters and see which ones thread on
Z436 will suit the sandwhich plate better as it sits 20mm higher than the standard z411 oil filter, (With a sandwhich plate) perfect if your can use low (I speak from smacking an oil filter on the ground at 110kms because it sat to low)
Super cheap sell the oil sandwhich plates with NPT threats for oil feed lines, can also buy generic brand ones with bigger fittings for oil coolers etc, if ya want pics I can send you some of my setup?
Super cheap sell the oil sandwhich plates with NPT threats for oil feed lines, can also buy generic brand ones with bigger fittings for oil coolers etc, if ya want pics I can send you some of my setup?
Icybienz
Member
Yeah pics would be great, I'll have to look at supercheap.
sandwhich plate with an oil feed line to the turbo on it, don’t mind the sump glue, had a small leak from user error. Using the z436 oil filter to sit the filter a little higher up then the stock one, sits below the sump and if the car is low, it might snap on something
Attachments
This is the new sandwhich plate with 2 10an fittings and 2 npt fittings for feed lines (for turbo oil/pressure gauges etc) I’m using the 10an fittings going into a stock evo6 oil cooler, ignore the white on the left, also had a small user error lol. the oil filter sits a little a little lower with the bigger sanwhich plate. but doesn’t cause to much of an issue