Nope. Definitely not.Will a Lancer finally get me some action?
Nope. Definitely not.Will a Lancer finally get me some action?
So do I need new door cards or is that only for the purpose of power windows? Or new doors, or just the wiring?The door looms to match for both the mirrors and the windows, if you don't have any extra cable on your door looms apart from the speaker wires you will definately need them. Windows you will probably also need a relay. I'm sure there is a pic of the relay box under the steering column somewhere on this forum and you have to see if there is wiring attached to the back of that relay aswell else you may need a dashloom too. And the mirror switch as well and hopefully there is a spare plug near where that slots in or else again, dash loom that has one.
This is just off the top of my head.
So do I need new door cards or is that only for the purpose of power windows? Or new doors, or just the wiring?
Will a Lancer finally get me some action?
i shouldnt have looked that up huhOnly if you drive it to 44 Upton Street Bundall
i shouldnt have looked that up huh
Yes. They are t5. Send bulbs are integrated into their sockets, but are still t5 sized. If integrated, you can buy t4 etc that are integrated, or buy sockets and put your t5s in those.Can you replace the led in the defogger and AC buttons?
You confused me abit there when i looked for t4 t5 leds.. But i now see that you have to wrap the wire round the rubber socket, the factory light is actually a bulb not led but the store i was looking in had loads that would work i just didnt know yet. Thanks rigbyYes. They are t5. Send bulbs are integrated into their sockets, but are still t5 sized. If integrated, you can buy t4 etc that are integrated, or buy sockets and put your t5s in those.
Hi,
Forgive me if this is a stupid question. Don’t know a lot about cars. I was topping up my coolant reserve tank and noticed the tube in the photo is not connected anything on the other end. Where is it supposed to go? And is this a big problem or an easy fix? TIA
Can anyone say if or what other applications the transfer case from a CM chassis lancer would work on ?
My apologies ... it seems I left out infoBeing from a 4G93, probably a 4G92/15 & 94
Anything from a CM or CK should work. Same *poo*. Possibly also CB, CD and CEMy apologies ... it seems I left out info
It's from a CM2A
If you grab one, feel free to share it here with a definition also!anyone know where i can get a stock 4g94 ecu rom as i am having difficulties pulling mine from my ecu
Sound like perhaps you might be low on brake pad material too then, the screeching is often the warning strip that is embedded to most brake pads to let you know its time to get ready to change them.When stopping hard sometimes my brake will feel like they are locking up, making a sound like a ship hull running aground. What is this and how can I fix it? I also have warped brakes as my steering wheel shudders when stopping hard so it isnt that.