Hello All
This is for discussion of swapping control arms and hubs etc, aswell as the effects that is has on wheel track, castor etc.
If you are posting specific information, try to reference your information or back it up with something.
This is for discussion of swapping control arms and hubs etc, aswell as the effects that is has on wheel track, castor etc.
If you are posting specific information, try to reference your information or back it up with something.
IIRC the front K frame of the FTO is different. Someone correct me otherwise.
But I have really high doubts that the front FTO LCAs are 20mm longer.
If someone has FTO front LCA to take measurements from, I can compare to both Evo 4 and Stock Lancer/Mirage (which I have measured).
There are lots of things that factor into the track of a car.
Hubs may be different,
LCAs may be different,
Subframe may have different mount positions,
Also, Front and Rear wheel track is measured from the centre of the RIM, not the hub. So wheel offsets also affect track, however wheel width does not.
Possibly need to check what offset wheels are used in the wheel track measurements.
I say this only so that its not assumed that "More track = Longer LCAs"
Crumble said:Thanks manlilandonaki said:For your information, if you go 5stud with FTO LCA's
Track of Lancer:
Front: 1450mm
Rear: 1460mm
Track of FTO:
Front: 1490mm
Rear: 1485mm
still a bit undecided on the 5 stud swap, probably cant really afford it at the moment. I should be able to afford the parts just not the wheels.
Go Kart should be up for sale soon so things may change