Side Skirts

Having Trouble fitting them as i have an es and the side skirts are off a vrx, any tipps guys? how do i hold them on without the clips?
 
:problem: What do you mean? The ES and VRX both have the same side length. If you are having fitting issues with the rear or the front lips, then its understandable as the VRX has slightly longer bumpers. Nevertheless they should all still fit, provided you measure and drill the holes accordingly.
 
BradChEs said:
... how do i hold them on without the clips?
Click to expand...
Use the provided clips/screws or mother nature will screw your skirts over.

3pgmde.jpg
 
BradChEs said:
Having Trouble fitting them as i have an es and the side skirts are off a vrx, any tipps guys? how do i hold them on without the clips?
Click to expand...

I fitted them to my ES no problem

Along the underside of the ES are several clips already in the body with a hole in them, and all of the screw holes in the skirts line up to one of these. Buy some screws which will fit into the holes (must be a little larger than the vrx screws, which are too small), sikkaflex along the top of the side skirt, lift and press to body, whilst having somebody hold it in place you put the screws in underneath. And make sure you bolt them on towards the front where the bolt holes line up with the mudguard holes. Then while the sikkaflex is drying, prop the skirts up with some old tyres or similar so they don't droop
 
You must log in or register to reply here.
Back
Top