Hey guys,
So I have tried searching and cannot find the specific information I require as some has been mentioned and some not so well .... or at all in 1 or 2 cases.
So I have an MY02 mirage I have swapped a 4G93 into. The main goal is a daily driven (reliable) car that I can go to the local track (Ringwood just north of Newcastle as I am a member of MGCCN who runs it) for some Hill climbs/Motorkhana/Khanacross.
I have a complete set of CG/CH 4 stud 276mm(f) and 260mm(r) setups with knuckles and trailing arms (just to find out they won't work as I had hoped).
I have a front strut brace that came from the engines donor car before we scrapped it and done a set of gas shocks and king springs with a set of 15x6.5 wheels and some fairly reasonable tyres it turns out (haven't gone to a track day yet) so it's handling ok but I want some more out of it.
TL;DR
I am making a trip to Sydney hopefully next week to scour PnP for parts so it looks like I am searching for proton GTI's for rear ends basically? hubs, trailing arms, control arms. sway bars (I think I will keep the fronts from the CG/CH and just redrill the rotors) I will be hitting up a local brake shop about making up some ADR braided lines to suit lengths.
Cheers Jimmib
So I have tried searching and cannot find the specific information I require as some has been mentioned and some not so well .... or at all in 1 or 2 cases.
So I have an MY02 mirage I have swapped a 4G93 into. The main goal is a daily driven (reliable) car that I can go to the local track (Ringwood just north of Newcastle as I am a member of MGCCN who runs it) for some Hill climbs/Motorkhana/Khanacross.
I have a complete set of CG/CH 4 stud 276mm(f) and 260mm(r) setups with knuckles and trailing arms (just to find out they won't work as I had hoped).
I have a front strut brace that came from the engines donor car before we scrapped it and done a set of gas shocks and king springs with a set of 15x6.5 wheels and some fairly reasonable tyres it turns out (haven't gone to a track day yet) so it's handling ok but I want some more out of it.
TL;DR
I am making a trip to Sydney hopefully next week to scour PnP for parts so it looks like I am searching for proton GTI's for rear ends basically? hubs, trailing arms, control arms. sway bars (I think I will keep the fronts from the CG/CH and just redrill the rotors) I will be hitting up a local brake shop about making up some ADR braided lines to suit lengths.
Cheers Jimmib