Early CH and CG are 4x100 also. Fairly rare in CH.I am quite sure the CH came in 4X114.3mm PCD.
And some even 5 stud.
So make sure you confirm this prior to buying any rims.
So... .. does that mean you will be offloading these 15s ?Thanks Spetz for your prompt reply. My '04 CH Sedan must be a 'parts bin' as it's fitted with 14 x 6, 4 x 100mm PCD ..... I have purchased some immaculate 15 x 5 Lancer Alloys, 4-stud 100mm PCD BUT would prefer the wider 6" rims for fitment of 195/65 R15 'rally tyres' ......
Eventually, they are in a movers truck coming from SA week ago, at moment the company cant locate 1 of the storage pod, will place in for sale section when they arrive, there not mine son’s, post pic when I find oneSo... .. does that mean you will be offloading these 15s ?
Just need to ensure those 'Enkie's are 4-stud, 100PCD ....... keep me informed Wagonmeister. ThksTrue, Mitsubishi had a lot of 4x100mm parts lying around from previous manufacturing, so they used them mainly on cg and few early ch sedans, rest Ch were all 4x114.3 or 5x114.3 vrx wagon/sedans.
Oh and welsor13, I may have a set of Mitsubishi GSR Enkie 15” x 6” wheels coming up shortly for sale, sons thinking about selling.
Oh another thing, I had a swap lined up however they turned out to be 4 x 114.3 Bugger.....would have been ideal. :-(Just need to ensure those 'Enkie's are 4-stud, 100PCD ....... keep me informed Wagonmeister. Thks
No, varies depends if they are factory or aftermarket mags, or steels.Did I read that Lancer 15 x 6 wheels suitable for Series CH sedan has +36mm offset? Can anyone help....
Gosh Wagonmeister, Mitsubishi really stirred up the variables when it comes to Lancer Wheel sizes.....like diameter, width, 4 & 5 stud, PCD's & offsets!..... I've checked using those 195/65 R15 Rally tyres & they'll give me a 20/21, 40/42, 60/63, 80/84, 100/106 & 120/127 kph 'errors' on the speedo BUT that's not too bad, really? I'm current battle still rests with purchasing those 15" x 6" 4-stud, 100 PCD & offset 35~45mm range.No, varies depends if they are factory or aftermarket mags, or steels.
All Lancers had standard (except evo’s ) from 05 back like the mr, vrx, es, gl’s all the way back to 93 all had a 46p offset from the factory, prior to that it was 45p in the 2D and gl hatch
Evo’s in 98 were 46p, 98-04 were 38p in 04 from factory.
Anything from 36p to 46p will fit, just tyre selection becomes critical as does wheel width, and ride height, struts, and the list goes on, on.
Any multi fit 15 inch 4x 100/114.3 pcd will fit, from 36p to 46p, Standard ch wheel diameter is from 595 to 602mm with 15/16 inch wheels, so if your using those tyres you. mentioned above (195/65 15) on a 15x6 rim you will be in trouble with speedo being way out, as you will be aprox 33mm over .