Lancer CK2A 6a12

[Terence Payet]

Hi everyone,


Been browsing through the forum for some time now in search of some info which in fact did help me with my conversion from 4g15 carb to the famous FTO 6a12 (attached pic of my project)

The conversion was simple enough, but now am getting some difficulties with my Tacho and Speedo. It does not seem to work. Did anyone had any trouble in getting them to work. Do you think i need to change my cluster?

I know this must have been posted before, but i can't seem to find it in the forum.


Many thanks in advance.


Regards,

 

[rigby]

@Joshy_morris will be able to sort you out. Can also find him on the Facey page

 

[hidum2]

Im pretty sure the rpm signal is different for each motor so the ce cluster won't work. Much easier if you use the fto cluster and even easier if you are already using the fto interior loom.

 

[Terence Payet]

@Joshy_morris will be able to sort you out. Can also find him on the Facey page

Many thanks rigby.
I'll ask him.

 

[Terence Payet]

Im pretty sure the rpm signal is different for each motor so the ce cluster won't work. Much easier if you use the fto cluster and even easier if you are already using the fto interior loom.

Was thinking about the FTO cluster, but wasn't sure it would fit. And unfortunately am using the stock ck2a wiring loom.